Thats right, the psp 3000 is now hackable!
Source: http://pspslimhacks.com/guide-to-chi...p-3000-ta88v3/
Here?s a quick run down of what we?re doing to need to get ChickHEN:
A PSP-3000 or PSP-2000 with firmware 5.03 (This is imperative, you won?t get ChickHEN to ever load with out it!)
The lastest ChickHEN release.
And a lot of patience
Firstly make sure your PSP-3000 or TA88v3 PSP-2000 has PSP Firmware 5.03 installed. Check in your PSP XMB go to Settings/ System Settings / System infomation. If you don?t have PSP 5.03 installed download it here. Create a folder called UPDATE in PSP/GAME on your memory stick and place the eboot from the archive into the folder. Run the 5.03 Firmware update from GAME / Memory stick and you will have 5.03. The firmware required to run ChickHEN.
Now download the ChickHEN R2 release from here. Open the CHickHEN R2 archive and place the folder inside Slim with gif images into your PSP memory stick location like so PSP/PHOTO (later it will be PSP/PHOTO/ChickHEN). Now place the h.bin into the root of your memory stick pro duo. Where the folders PSP, MUSIC etc are located.
Ok next step place the memory stick into the PSP. We have found this step helps ChickHEN boot with less attempts, go your PSP XMB, to settings and Restore Default Settings. Your PSP will reset, now go back into settings and turn off UMD Auto-Start and UMD Cache. We found ChickHEN loads in 2-3 goes after doing this.
Now go into Photo / Memory Stick and ChickHEN. And wait, you will see five egg giff images, these will start to load thumbnails. Your PSP may freeze and reset. Just keep retrying and ChickHEN R2 will load up?.But if you see flashing colors, your PSP will reboot into ChickHEN your homebrew ready!
With ChickHEN R2 loaded now starts the fun part. (P.S You can put your PSP into standby now so you don?t have to go through the whole process again).
5.03 GEN-A Custom Firmware released! CFW on PSP-3000?s
Source: http://pspslimhacks.com/503gen-a-cus...ware-released/
PSPGEN have released Custom Firmware 5.03GEN-A for HEN!! What does this mean? Well its something many of us have been waiting for since the PSP-3000 was released. Full blown Custom Firmware is now possible on your PSP-3000 / PSP-2000 TA088v3. Thanks to GENyUS and PSPGen.com.
How to Install,
Pre installation: Make sure you have a PSP-3000 or PSP-2000 with Firmware 5.03 ? You need this for ChickHEN R2 to work.
Download ChickHEN R2 by Davee & Team Typhoon
Download 5.03 GEN-A Custom Firmware.
Install ChickHEN and run/load ChickHEN R2
Follow these steps below
01. Connect your PSP to the computer in USB Mode when you have loaded ChickHEN R2.
02. Unzip 5.03GEN-A_for_HEN.zip on your desktop by example
03. double-click on LAUNCH-ME.exe (GUI)
04.PSP Model : choose options PSP-2000 or PSP-3000 (depends of your PSP)
05.Mode : Choose option FULL
06. PSP Install : Choose option YES
07. Push START.
08.the files are copied on your PSP.
09. Disconnect the PSP from USB.
10. Launch the main EBOOT.PBP / Loader using ChickHEN R2 (only R2! NOT R1!).
11. When the app load, press L or R to flash the firmware in your flash. YOU ONLY NEED MAKE IT ONE TIME!
12. Press () to reboot in the custom firmware.
Features:
# COMPATIBILITY PSP-3000 and PSP-2000 v3
o Reading of plays PS1
o Reading of the backups of plays PSP
o GEN VSH FINELY available
o Recovery in VSH available (some bugs remains to be regulated ? to see further)
o Access to the PSN
mods please let me know if anything is against the rules and i will immediately fix it accordingly.
Source: http://pspslimhacks.com/guide-to-chi...p-3000-ta88v3/
Here?s a quick run down of what we?re doing to need to get ChickHEN:
A PSP-3000 or PSP-2000 with firmware 5.03 (This is imperative, you won?t get ChickHEN to ever load with out it!)
The lastest ChickHEN release.
And a lot of patience
Firstly make sure your PSP-3000 or TA88v3 PSP-2000 has PSP Firmware 5.03 installed. Check in your PSP XMB go to Settings/ System Settings / System infomation. If you don?t have PSP 5.03 installed download it here. Create a folder called UPDATE in PSP/GAME on your memory stick and place the eboot from the archive into the folder. Run the 5.03 Firmware update from GAME / Memory stick and you will have 5.03. The firmware required to run ChickHEN.
Now download the ChickHEN R2 release from here. Open the CHickHEN R2 archive and place the folder inside Slim with gif images into your PSP memory stick location like so PSP/PHOTO (later it will be PSP/PHOTO/ChickHEN). Now place the h.bin into the root of your memory stick pro duo. Where the folders PSP, MUSIC etc are located.
Ok next step place the memory stick into the PSP. We have found this step helps ChickHEN boot with less attempts, go your PSP XMB, to settings and Restore Default Settings. Your PSP will reset, now go back into settings and turn off UMD Auto-Start and UMD Cache. We found ChickHEN loads in 2-3 goes after doing this.
Now go into Photo / Memory Stick and ChickHEN. And wait, you will see five egg giff images, these will start to load thumbnails. Your PSP may freeze and reset. Just keep retrying and ChickHEN R2 will load up?.But if you see flashing colors, your PSP will reboot into ChickHEN your homebrew ready!
With ChickHEN R2 loaded now starts the fun part. (P.S You can put your PSP into standby now so you don?t have to go through the whole process again).
5.03 GEN-A Custom Firmware released! CFW on PSP-3000?s
Source: http://pspslimhacks.com/503gen-a-cus...ware-released/
PSPGEN have released Custom Firmware 5.03GEN-A for HEN!! What does this mean? Well its something many of us have been waiting for since the PSP-3000 was released. Full blown Custom Firmware is now possible on your PSP-3000 / PSP-2000 TA088v3. Thanks to GENyUS and PSPGen.com.
How to Install,
Pre installation: Make sure you have a PSP-3000 or PSP-2000 with Firmware 5.03 ? You need this for ChickHEN R2 to work.
Download ChickHEN R2 by Davee & Team Typhoon
Download 5.03 GEN-A Custom Firmware.
Install ChickHEN and run/load ChickHEN R2
Follow these steps below
01. Connect your PSP to the computer in USB Mode when you have loaded ChickHEN R2.
02. Unzip 5.03GEN-A_for_HEN.zip on your desktop by example
03. double-click on LAUNCH-ME.exe (GUI)
04.PSP Model : choose options PSP-2000 or PSP-3000 (depends of your PSP)
05.Mode : Choose option FULL
06. PSP Install : Choose option YES
07. Push START.
08.the files are copied on your PSP.
09. Disconnect the PSP from USB.
10. Launch the main EBOOT.PBP / Loader using ChickHEN R2 (only R2! NOT R1!).
11. When the app load, press L or R to flash the firmware in your flash. YOU ONLY NEED MAKE IT ONE TIME!
12. Press () to reboot in the custom firmware.
Features:
# COMPATIBILITY PSP-3000 and PSP-2000 v3
o Reading of plays PS1
o Reading of the backups of plays PSP
o GEN VSH FINELY available
o Recovery in VSH available (some bugs remains to be regulated ? to see further)
o Access to the PSN
mods please let me know if anything is against the rules and i will immediately fix it accordingly.
